1 Important
2 Your Docking
Speaker
#ꢊ Read these instructions.
#ꢊ Heed all warnings.
#ꢊ Follow all instructions.
#ꢊ Do not use this apparatus near water.
#ꢊ Do not block any ventilation openings.
Install in accordance with the
Congratulations on your purchase, and
%ꢂꢐꢃꢇꢓꢂꢊꢆꢇꢊ&ꢌꢄꢐꢄꢁꢉ(ꢊ)ꢇꢊꢙꢎꢐꢐꢖꢊ"ꢂꢈꢂ\ꢆꢊꢙꢍꢇꢓꢊꢆꢌꢂꢊ
support that Philips offers, register your product
manufacturer's instructions.
#ꢊ Do not install near any heat sources such
as radiators, heat registers, stoves, or
ꢇꢆꢌꢂꢍꢊꢅꢁꢁꢅꢍꢅꢆꢎꢉꢊꢏꢄꢈꢃꢐꢎꢑꢄꢈꢒꢊꢅꢓꢁꢐꢄ\ꢂꢍꢉꢔꢊꢆꢌꢅꢆꢊ
produce heat.
#ꢊ Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
#ꢊ ꢕꢈꢐꢖꢊꢎꢉꢂꢊꢅꢆꢆꢅꢃꢌꢓꢂꢈꢆꢉꢗꢅꢃꢃꢂꢉꢉꢇꢍꢄꢂꢉꢊꢉꢁꢂꢃꢄ\ꢂꢑꢊ
by the manufacturer.
#ꢊ Unplug this apparatus during lightning storms
or when unused for long periods of time.
#ꢊ ꢘꢂꢙꢂꢍꢊꢅꢐꢐꢊꢉꢂꢍꢚꢄꢃꢄꢈꢒꢊꢆꢇꢊꢛꢎꢅꢐꢄ\ꢂꢑꢊꢉꢂꢍꢚꢄꢃꢂꢊ
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, Bluetooth devices, and
other external audio devices.
What's in the box
Check and identify the contents of your
package:
#ꢊ Main unit
#ꢊ AC power adaptor
#ꢊ Quick start guide
#ꢊ Apparatus shall not be exposed to
dripping or splashing.
#ꢊ Do not place any sources of danger on the
ꢅꢁꢁꢅꢍꢅꢆꢎꢉꢊꢏꢂ!ꢒ!ꢊꢐꢄꢛꢎꢄꢑꢊ\ꢐꢐꢂꢑꢊꢇ"#ꢂꢃꢆꢉ$ꢊꢐꢄꢒꢌꢆꢂꢑꢊ
ꢃꢅꢈꢑꢐꢂꢉꢔ!ꢊ
#ꢊ Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
# Never remove the casing of this apparatus.
# Never place this apparatus on other electrical
equipment.
# Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
3
EN
Overview of the main unit
a
b
e
d
c
a Dock for the iPod/iPhone
b VOL +/-
#ꢊ Adjust volume.
c MP3 LINK
#ꢊ Connect an external audio device.
d DC IN
#ꢊ Connect power.
e
#ꢊ Enable or disable Bluetooth function.
EN
4
3 Get started
4 Play
Always follow the instructions in this chapter in
sequence.
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Connect power
Caution
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
#ꢊ iPod touch (1st, 2nd, 3rd, and 4th
ꢒꢂꢈꢂꢍꢅꢆꢄꢇꢈꢔ
#ꢊ iPod classic
# Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
# Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
#ꢊ iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
ꢒꢂꢈꢂꢍꢅꢆꢄꢇꢈꢔ
Note
# The type plate is located at the back of the docking
speaker.
#ꢊ iPhone 4S
#ꢊ iPhone 4
#ꢊ iPhone 3GS
Connect the power adaptor to:
#ꢊ the DC IN socket at the back of the
docking speaker.
#ꢊ iPhone 3G
#ꢊ iPhone
#ꢊ the wall outlet.
Listen to the iPod/iPhone
1 Place an iPod/iPhone in the dock.
2 Play audio from the iPod/iPhone.
DC IN
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
5
EN
3 Scan Bluetooth devices that can pair with
Charge the iPod/iPhone
your device.
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
4 When “PHILIPS AD620” is displayed on
your device, select it to start connection.
» =ꢇꢎ"ꢐꢂꢊ"ꢂꢂꢁꢊꢆꢇꢈꢂꢊꢃꢇꢈ\ꢍꢓꢅꢆꢄꢇꢈꢊꢄꢉꢊ
heard and the Bluetooth button stops
blinking if connection is successful.
Play from Bluetooth device
Pair with Bluetooth deivces
Note
» A different Bluetooth icon is displayed
on your device.
# Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
# The effective operation range between the docking
system and the paired device is approximately 10
ꢓꢂꢆꢂꢍꢉꢊꢏ;<ꢊꢙꢂꢂꢆꢔ!ꢊ
# Keep this docking speaker away from other electronic
devices that may cause interference.
1 Press to select Bluetooth source.
» The Bluetooth button blinks.
2 Turn on Bluetooth function on your device.
#ꢊ Different devices may have different
way to activate Bluetooth.
AD620
5 Play music in your device.
» Music comes through the docking
speaker.
Tip
# If your Bluetooth device has been paired with AD620
"ꢂꢙꢇꢍꢂ$ꢊꢖꢇꢎꢊ#ꢎꢉꢆꢊꢈꢂꢂꢑꢊꢆꢇꢊ\ꢈꢑꢊꢇꢎꢆꢊP&?@J@&ꢀꢊL=VX<Qꢊꢇꢈꢊ
ꢖꢇꢎꢍꢊ[ꢐꢎꢂꢆꢇꢇꢆꢌꢊꢓꢂꢈꢎ$ꢊꢆꢌꢂꢈꢊꢃꢇꢈ\ꢍꢓꢊꢆꢌꢂꢊꢃꢇꢈꢈꢂꢃꢆꢄꢇꢈ!
To disconnect Bluetooth:
#ꢊ Press on the docking speaker again; or
#ꢊ Deactivate Bluetooth function on
your device or move it beyond the
communication range.
EN
6
5 Product
Play from an external audio
device
information
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
1 If no iPod/iPhone is docked, connect an
]&;ꢊꢐꢄꢈ^ꢊꢃꢅ"ꢐꢂꢊꢏꢈꢇꢆꢊꢉꢎꢁꢁꢐꢄꢂꢑꢔꢊꢆꢇ`
#ꢊ the MP3-LINK socket at the back of
the docking speaker.
Note
# Product information is subject to change without prior
notice.
ꢀꢁꢂꢃꢄ\ꢃꢅꢆꢄꢇꢈꢉ
#ꢊ the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
ꢊꢋꢁꢌꢄ\ꢂꢍ
Total Output Power
Signal to Noise Ratio
]&;ꢊJꢄꢈ^
10 W per channel x 2
> 62 dBA
650 mV RMS
2 Play music on the device (see the device's
ꢎꢉꢂꢍꢊꢓꢅꢈꢎꢅꢐꢔ!ꢊ
Bluetooth
Standard
Adjust volume
Bluetooth StandardVersion
2.1+EDR
<ꢊꢑ[ꢓꢊꢏ~ꢐꢅꢉꢉꢊXꢔ
During play, press VOL +/- to adjust volume.
Output power
Frequency band 2.402~2.480 GHzISM Band
Range €<ꢊꢓꢊꢏꢙꢍꢂꢂꢊꢉꢁꢅꢃꢂꢔ
General information
AC Power
Model:AS190-100-
L@€<ꢊꢏ&ꢌꢄꢐꢄꢁꢉꢔ‚
Input: 100-240V ~,
50/60Hz, 0.7A;
Output: 10V 1.8 A
Operation Power
Consumption
Standby Power
Consumption
Max. load for iPod/
iPhone
15 W
<0.5 W
5V 1 A
Dimensions
- Main Unit
ꢏꢜꢊꢝꢊ?ꢊꢝꢊ=ꢔ
Weight
- Main Unit
- With Packing
275 x 117 x 121 mm
1.2 kg
1.7 kg
7
EN
Cannot connect with the system.
6 Troubleshooting
#
)ꢌꢂꢊꢑꢂꢚꢄꢃꢂꢊꢑꢇꢂꢉꢊꢈꢇꢆꢊꢉꢎꢁꢁꢇꢍꢆꢊꢆꢌꢂꢊꢁꢍꢇ\ꢐꢂꢉꢊ
required for the system.
#
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
Warning
# Never remove the casing of this apparatus.
#
#
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
ꢏ%%%!ꢁꢌꢄꢐꢄꢁꢉ!ꢃꢇꢓꢗꢉꢎꢁꢁꢇꢍꢆꢔ!ꢊꢜꢌꢂꢈꢊꢖꢇꢎꢊꢃꢇꢈꢆꢅꢃꢆꢊ
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
The paired device connects and disconnects
constantly.
#
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
#
No power
#
Ensure that the AC power adaptor of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
#
No sound
#
Adjust the volume.
No response from the unit
#
Disconnect and reconnect the AC power
adaptor, then turn on the unit again.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
#
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
#
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
EN
8
7 Notice
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Lꢈꢖꢊꢃꢌꢅꢈꢒꢂꢉꢊꢇꢍꢊꢓꢇꢑꢄ\ꢃꢅꢆꢄꢇꢈꢉꢊꢓꢅꢑꢂꢊꢆꢇꢊꢆꢌꢄꢉꢊ
device that are not expressly approved by
&ꢌꢄꢐꢄꢁꢉꢊ~ꢇꢈꢉꢎꢓꢂꢍꢊJꢄꢙꢂꢉꢆꢖꢐꢂꢊꢓꢅꢖꢊꢚꢇꢄꢑꢊꢆꢌꢂꢊꢎꢉꢂꢍSꢉꢊ
authority to operate the equipment.
P]ꢅꢑꢂꢊꢙꢇꢍꢊꢄ&ꢇꢑQꢊꢅꢈꢑꢊP]ꢅꢑꢂꢊꢙꢇꢍꢊꢄ&ꢌꢇꢈꢂQꢊ
mean that an electronic accessory has been
ꢑꢂꢉꢄꢒꢈꢂꢑꢊꢆꢇꢊꢃꢇꢈꢈꢂꢃꢆꢊꢉꢁꢂꢃꢄ\ꢃꢅꢐꢐꢖꢊꢆꢇꢊꢄ&ꢇꢑꢊꢇꢍꢊ
ꢄ&ꢌꢇꢈꢂꢊꢍꢂꢉꢁꢂꢃꢆꢄꢚꢂꢐꢖ$ꢊꢅꢈꢑꢊꢌꢅꢉꢊ"ꢂꢂꢈꢊꢃꢂꢍꢆꢄ\ꢂꢑꢊ"ꢖꢊ
the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
ꢉꢂꢁꢅꢍꢅꢆꢂꢊꢄꢈꢆꢇꢊꢆꢌꢍꢂꢂꢊꢓꢅꢆꢂꢍꢄꢅꢐꢉ`ꢊꢃꢅꢍꢑ"ꢇꢅꢍꢑꢊꢏ"ꢇꢝꢔ$ꢊ
ꢁꢇꢐꢖꢉꢆꢖꢍꢂꢈꢂꢊꢙꢇꢅꢓꢊꢏ"ꢎꢙꢙꢂꢍꢔꢊꢅꢈꢑꢊꢁꢇꢐꢖꢂꢆꢌꢖꢐꢂꢈꢂꢊ
ꢏ"ꢅꢒꢉ$ꢊꢁꢍꢇꢆꢂꢃꢆꢄꢚꢂꢊꢙꢇꢅꢓꢊꢉꢌꢂꢂꢆ!ꢔꢊ
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
This product complies with the radio
interference requirements of the European
Community.
9
EN
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AD620_05_UM_EN_V1.0
|